Questions and Answers about Induction Lighting

Q and A

Q1. What is Induction lighting and how does it work?
A1. The inductively coupled electrode-less lamp uses magnetic-induction technology instead of an electrode at each end of a fluorescent tube to generate light. The absence of these electrodes allows longer lamp life.

Q2. What are the components of the Induction System?
A2. The system is comprised of two components; the Patented IC ballast and the lamp.

Q3. Why Induction Lighting?
A3. Induction lighting offers an incredible 100,000 hours of life making it virtually maintenance free. With 80+ CRI and a wide range of color temperatures from 2700K-6500K this lamp delivers the most reliable source of light in an extreme operating temperature conditions or even “on” and “off” applications.

Q4. Can running a lamp interfere with computers or any other electronic devices?
A4. NO! The systems comply or exceeds Low EMI Standards of FCC (47CFR Part No. 18 Non-Consumer) rules with non-interference under normal circumstances.

Q5. Will the lamp interfere with telecommunication equipment?
A5. NO! The systems are certified FCC standards (47CFR Part No. 18 Non-Consumer) and are in place to protect navigation and radio communications. The systems will not interfere with portable or cellular phones.

Q6. Is the light output of an Induction System affected by low temperature? High temperatures?
A6. With our proprietary amalgam technology and IC technology our lamps provide a stable light output over a wide range of ambient temperatures, marinating at least 90% of normal lumens from –30° F to 260° F and will start at temperatures as low as –40° F

Q7. Does operating position affect the output?
A7. No. The universal operating position does not affect the performance of the Induction System.

Q8. What is the color shift of the Induction System?
A8. This system operates like most typical fluorescents with the respect to phosphors and will not deviate over time.

Q9. Is the Induction System dimmable?
A9. Yes. The 40 & 80-watt systems are dimmable down to 50% and available on special request.

Q10. Can the Induction System be used for a flashing beacon?
A10. Yes. With the new IC technology generators constant “on” and “off” usage will have no impact on the life of the system.

Q11. Will the Induction System fade or damage materials?

 

A11. The amount of ultraviolet light generated by induction is roughly equivalent to that of linear fluorescent lamps. The damage factor for materials is rated as a low 0.3 factor, so induction can be used in open luminaries without any front glass

Q12. Is Induction Systems vibration-resistant?
A12. Yes. The fact Induction Systems have no electrodes, which makes it more reliable in high-vibration and gusty applications. Induction Systems have proven durability in bridges, tunnels and signage applications.

Q13. What if any, is the effect of voltage supply fluctuations on the performance of the Induction System?
A13. Due to a pre-built conditioner in the HF Generator, which provides a well stabilized internal supply voltage (+/- 15% of the supply voltage) to the HF Generator, the light output , consume power and systems efficacy of the lamp systems varies less than 1% as a result to mains voltage fluctuations. There is no noticeable effect on the color performance or rendering outputs.

Q14. At the end of life, must all components be replaced?
A14. Each item is separately replaceable, however since we supply everything as a system, even for re-lamping, the IC ballast is recommended to be replaced as well.

Q15. What needs to be recycled as hazardous waste?
A15. Like its fluorescent cousin, the lamps and ballast should be recycled. But with a 5-10 times longer life, recycling costs will be greatly reduced.

Q16. Why are Green Energy Management Solutions systems worth more?
A16. The induction system offers 5 to 10 times more life than Fluorescent and HID systems. Even at the two to three times the cost of these systems it easy to justify due to its high RETURN ON INVESTMENT in maintenance savings and, in the case of security lighting, reduction of liability.

See the little stem that stick inward at about 9:30 as the clock would look? This is the only part of the light that has to be disposed of in a small hazardous box; if the box is a three inch cube you can most likely place 50-70 of these stems in the box. Now remember this will be after at least 20 years!

 

Did you like this? Share it:
Posted in Induction lighting Q&A | Leave a comment

New Test Blog

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam quis fringilla risus. Etiam velit nibh, sollicitudin sit amet tincidunt sed, interdum ut turpis. Integer laoreet mattis dolor. Vivamus vel diam lacus. Phasellus eget arcu a magna luctus imperdiet. Aliquam placerat vehicula posuere. Vivamus ut velit quis ligula pharetra tincidunt sed id nisl. Quisque vel sapien metus. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Praesent nec tortor erat, ac fringilla diam. Sed at justo at urna blandit suscipit sed et elit. Suspendisse sagittis sapien eget nisi ultrices gravida. Vivamus placerat tristique laoreet. Vestibulum augue enim, cursus non pulvinar vitae, venenatis pharetra lectus. Aenean quam est, viverra vitae auctor quis, rutrum non nisi. Ut nulla dui, luctus sit amet molestie a, lacinia vel urna. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Pellentesque risus lorem, gravida vitae pellentesque at, sodales non turpis.

Quisque nec odio risus, tempor pharetra lorem. Sed et quam at justo egestas hendrerit ut sed mauris. Maecenas lacus arcu, faucibus et commodo a, sagittis ac eros. Maecenas magna justo, sagittis ut sagittis quis, rhoncus nec sapien. Mauris non metus libero. Maecenas semper laoreet dolor nec venenatis. Suspendisse potenti. Duis purus lacus, dapibus bibendum porttitor ut, tincidunt venenatis erat. Suspendisse molestie turpis non sem molestie ultricies. Donec risus leo, hendrerit venenatis tincidunt vitae, condimentum sed dui. Morbi vitae ante arcu.

Suspendisse a magna sit amet nunc mollis commodo iaculis nec ipsum. Curabitur facilisis suscipit arcu, et egestas nisl vestibulum ac. In feugiat mauris ut orci feugiat et commodo est interdum. Vivamus rhoncus quam et elit volutpat porta. Maecenas mollis vehicula sapien, at porttitor lacus ultrices et. Nunc ultricies arcu non neque semper eu pellentesque massa ullamcorper. Praesent pulvinar mattis metus ut pulvinar. Proin imperdiet turpis sed turpis consequat euismod. Aliquam vestibulum aliquam suscipit. Nunc a tellus nisi, tempor varius risus.

Aliquam eget tristique sapien. Ut id blandit ligula. Aliquam vitae magna massa, nec varius ante. Cras nec sagittis justo. Sed ornare viverra mi, a adipiscing diam vulputate ac. Proin sed ipsum eros, ut iaculis turpis. In nec felis nisl, a interdum tellus. Cras non velit metus, quis ultricies purus. Suspendisse ornare interdum felis, sed fermentum augue interdum a. In venenatis tortor a ligula gravida vel interdum elit euismod.

 

Did you like this? Share it:
Posted in Uncategorized | Tagged , , | Leave a comment